Inspired from the highly efficient aerodynamics of birds, the versatility of the jelly-moon fringes, the manta ray and sharks, the multidisciplinary project BEALIVE introduces a new science and technology at the interface between aeronautics and bioengineering. The project creates a “live skin” composed of an innovative moving interface between an air-vehicle and the surrounding turbulence. Applied around a body, e.g. around an aircraft’s wing, this contributes to increase the aerodynamic performance and reduce noise far beyond all systems currently under study. The solid-fluid interface is composed of a large number of electroactive fringes made of an optimized combination of Carbon-Nano-Tubes and Graphene with high sensing and actuation capacity, able to deform and vibrate. This allows the skin to interact with the surrounding inhomogeneous turbulent flow. The interface between the solid and the fluid consists of the active fringes (shells) forming a porous-medium, modeled by poroelastic theory. The interaction and manipulation of the fluid-structure and fluid-fluid turbulent interfaces will create an optimal new medium with no distinction between the fluid and the solid structure. The “live skin” and the overall design will contain Big Data and rely on Artificial Intelligence and on a Controller that will define and optimise the dynamics of the system in real time and in large scale. The optimization will be based on data assimilation from Wind Tunnel experiments and from Hi-Fi CFDSM (Computational Fluid-Dynamics Structural Mechanics) using a triple solver coupling: structural modelling (SM), porous layer and turbulent flow. The design has as kernel a hierarchy of the interfaces, from micro to macroscale, between material-material, material-flow and flow-flow. Such enhanced levels of manipulation will allow drastic increases of aerodynamic performance and energy efficiency in all flight phases, beyond any currently foreseeable
targets.
The BEALIVE project participated to an invited session of EASN 2026 in Toulouse “Innovative Electroactive Morphing for disruptive and sustainable wing design” by Dr. Marianna Braza “coordinator of the HORIZON-2023-2027-PATHFINDER-Project N° 101129952-BEALIVE – Bioinspired Electroactive multiscale Aeronautical Live skin”,



The BEALIVE project participated at the WCCM ECCOMAS Conference in Münich, https://wccm-eccomas2026.org/, 19-24 July 2026 with the Special Technology Session STS425 ” Disruptive Aircraft’s Wing design through innovative Electroactive Morphing towards sustainable aviation”
co-chaired by Marianna Braza and Yannick Hoarau: https://wccm-eccomas2026.org/event/area/a4d69690-be45-11f0-a555-000c29ddfc0c
with 5 oral presentations devided in STS425A: https://wccm-eccomas2026.org/event/session/7505019e-4163-11f1-986a-000c29ddfc0c whose first was a Keynote and STS425B, https://wccm-eccomas2026.org/event/session/ce3055bd-41a0-11f1-986a-000c29ddfc0c . These sessions inlcuded also two other contributions outside of the project.



BEALIVE project participated to the 3AF International Conference on Applied Aerodynamics (60th edition), Sixty Years of Innovation & Upcoming Challenges in Aerodynamics Paris, France – February 23-24-25, 2026





BEALIVE project participated with an invited session in the EASN 2025 conference, October 14-17, Madrid, Spain
Session: Innovative electroactive morphing for disruptive future wing design towards long term sustainability.
- [14:00 – 14:15] Enhanced aerodynamic performance of transonic flow over an A320 morphing wing using Hi-Fi numerical simulation at Reynolds number of 4.5 million
J. Abou-Khalil , Asproulias, A. Marouf, R. El Akoury, Y. Hoarau, J.F. Rouchon, M. Braza - [14:15 – 14:35] Influence of inclusions morphology on the frequency response of a piezoelectric bimorph actuator made of a PVDF/PZT-5A composite
Salah Elbarnaty , J.P.M. Correia, Wiyao Azoti, Saïd Ahzi - [14:35 – 14:55] Reduced Order Modelling by means of Proper Orthogonal Decomposition and Machine Learning for aerodynamic turbulent flows
Nils Maynard , Abderahmane Marouf, Jacques Abou Khalil, Rajaa El Akoury, Yannick Hoarau, Jean-François Rouchon, Marianna Braza - [14:55 – 15:15] Spanwise travelling wave morphing trailing edge around an A320 wing through numerical simulation
Clément Rouaix , Horia Hangan, Marianna Braza - [15:15 – 15:30] Experimental Investigation of Electroactive Morphing on an A320 Prototype under Subsonic Take-Off Conditions
J. Abou Khalil , N. Maynard, X. Delon, R. El Akoury, G. Harran, S. Cazin, M. Marchal, F. Bergame, H. Ayroles, J-F. Rouchon, M. Braza - [15:30 – 15:45] Numerical simulation and physical analysis of the flow around a A320 wing prototype: electroactive morphing through waves actuation
N. Maynard, X. Delon, R. El Akoury, J. Abou Khalil, J.F. Rouchon, M. Braza - [15:45 – 16:00] Numerical investigation of the impact of embedded flapping actuators on wake dynamics and aerodynamic performance of a reduced-scale A320 airfoil in take-off and landing conditions
R. Gauthier, J. Abou-Khalil, A. Marouf, Y. Hoarau, M. Braza, J. Vos

BEALIVE project participated to the FSSIC2025 Conference at Ontario Tech, Canada
Keynote at the FSSIC2025 Conference at Ontario Tech !
On July 28th 2025, Dr Marianna Braza presented the “Electroactive morphing for disruptive wing design enabling drastic aerodynamic performance increase”.




BEALIVE participated to the FAPESP Conference, Toulouse, France
Invited presentation of Dr. Marianna Braza at the Conference FAPESP – Aeronautics Conference, https://fapesp.br/week/2025/france/aeronauticsprogram among French and Brésil Research Centres and AIRBUS on 11th June 2025, entitled: ” Electroactive morphing for future wing design enabling drastic aerodynamic performance increase”.

BEALIVE project participated to the 3AF International Conference on Applied Aerodynamics (59th edition), Unsteady Flows Recent developments and applications, Strasbourg, France – March 24-25-26



1st year evaluation meeting of the BEALIVE project – Toulouse
On February 21th, 2025, the project successfully completed its first year with an enlightening review from four experts in the domain, under the supervision of the Project Officer Dr. Nikolaos Stergiannis . The meeting took place at the Engineering school ENSEEIHT in Toulouse, France.













International Conference on Applied Aerodynamics (59th edition)
Cover image in the call for papers for the 2025 3AF International Conference on Applied Aerodynamics (59th edition), selected from our aerodynamic simulation results in takeoff conditions at high-Reynolds number. A collaboration between ICUBE and IMFT.



Participation to the EASN 2024 conference
The Eu project BEALIVE has participated in a special invited session in the 14th EASN International Conference, an event focused on “Innovation in Aviation & Space towards sustainability today & tomorrow”, hosted by EASN Association and the Aristotle University of Thessaloniki. The conference will be held from October 8th to 11th, 2024, in the lively city of Thessaloniki, Greece, at the renowned Concert Hall of the city.






STN organised the 06 month meeting held in Wismar, Germany





















Invited session to the ECCOMAS CONGRESS 2024
9th European Congress on Computational Methods in Applied Sciences and Engineering, 3-7 June 2024, Lisboa, Portugal
TECHNICAL INVITED SESSION: Disruptive Aircraft’s Wing Configurations towards Greening of Aviation I 06/06/2024








ECCOMAS 2024: Cover page of the book of abstract
Results of the PhD student (Clément Rouaix) and post-doc (Rajaa El Akoury) from IMFT have been selected for the cover page of the book of abstracts in the ECCOMAS conference.




Participation to 11th Japanese-French Frontiers of Science (JFFoS) Symposium
STRASBOURG UNIVERSITY CAMPUS, FRANCE May 24 – 27, 2024


Participation to the 3AF conference
The 3AF International Conference on Applied Aerodynamics, Orléans, France – March 27-28-29, 2024





Kick-off meeting – BEALIVE EU project
Toulouse, France, 15th/16th January, 2023







